How can I tell ?

Latest Articles

How can I tell ?

Downsizer Forum Index -> Reduce, Reuse, Recycle

Author

Message

Falstaff

Joined: 27 May 2009
Posts: 1014

Posted: Sun Dec 28, 14 1:32 pm Post subject: How can I tell ?
Whether this 'ere can is full of petrol - or 2 stroke ? (If it's petrol I can cut the grass ) If it's 2 stroke I can cut some logs for the fire ! .

Bungo

Joined: 21 Dec 2011
Posts: 354
Location: Wye Valley

Posted: Sun Dec 28, 14 1:41 pm Post subject:
Pour a bit in a jamjar. Is it tinged red or green ? If so it has 2 stroke oil in it though at what ratio is anybodies guess

Hairyloon

Joined: 20 Nov 2008
Posts: 15452
Location: Today I are mostly being in Yorkshire.

Posted: Sun Dec 28, 14 1:56 pm Post subject:
Putting two stroke fuel in a four stroke engine is unlikely to cause any lasting harm, certainly a lot less than four stroke fuel in a two stroke engine... Alternatively, add oil: at worst you'll end up with a 25:1 mix. Instead of 50:1.

Falstaff

Joined: 27 May 2009
Posts: 1014

Posted: Sun Dec 28, 14 4:13 pm Post subject:

Bungo wrote:

Pour a bit in a jamjar. Is it tinged red or green ? If so it has 2 stroke oil in it though at what ratio is anybodies guess

Ah Logic !

Sadly, when you're dealing with someone who is red /green colourblind and uses whatever old oil happens to be lying about to mix 2-stroke with, logic such as this tends to fall down in the face of imperfection on the part of the operative !

Falstaff

Joined: 27 May 2009
Posts: 1014

Posted: Sun Dec 28, 14 4:32 pm Post subject:

Hairyloon wrote:

...
Alternatively, add oil: at worst you'll end up with a 25:1 mix. Instead of 50:1.

Yup - that's what I thought too ! Even found some genuine 2 stroke oil to add to the mix. Sadly the only oil I could find for the "chain oiler" was 10-40 semi-synthetic (which still had the price stuck on the bottle)

Anyway, now have enough logs to get through a few days even if the saw ran pretty sick.

It seemed to run best (but not right) when the unit was held dead level.

Somebody's obviously had a bit of bother with it in the past and I bought it second hand a few months ago. The dead man's handle has been bypassed and the stopper button doesn't work either . It's a little Stihl btw.

Any ideas ?

oldish chris

Joined: 14 Jun 2006
Posts: 4148
Location: Comfortably Wet Southport

Posted: Sun Dec 28, 14 5:30 pm Post subject:

Falstaff wrote:

t It's a little Stihl btw.

Is that a euphemism? (Just that I've been called something similar

)

Mistress Rose

Joined: 21 Jul 2011
Posts: 16121

Posted: Mon Dec 29, 14 9:20 am Post subject:
Sounds as if you need to thoroughly overhaul the saw; the first job being to get the dead mans handle going again. As far as the red/green goes, is there nobody else to tell you the colour?

Nick

Joined: 02 Nov 2004
Posts: 34535
Location: Hereford

Posted: Mon Dec 29, 14 9:43 am Post subject:
Doesn't matter if it's red or green. Either suggest oil.

Hairyloon

Joined: 20 Nov 2008
Posts: 15452
Location: Today I are mostly being in Yorkshire.

Posted: Mon Dec 29, 14 10:53 am Post subject:

Nick wrote:

Doesn't matter if it's red or green. Either suggest oil.

I've had purple two stroke before, but old petrol can develop a tinge by itself, so I wouldn't necessarily trust a colour to mean it has oil.

dpack

Joined: 02 Jul 2005
Posts: 46386
Location: yes

Posted: Mon Dec 29, 14 1:56 pm Post subject:
mend saw ,get clean fule if the machine is iffy, esp the brakes,it wont be safe or easy to cut wood. older stihl do have a good reputation for easy mend

Hairyloon

Joined: 20 Nov 2008
Posts: 15452
Location: Today I are mostly being in Yorkshire.

Posted: Mon Dec 29, 14 2:12 pm Post subject:
* fuel

	Downsizer Forum Index -> Reduce, Reuse, Recycle	All times are GMT
Page 1 of 1

View Latest Posts