Home Page
   Articles
       links
About Us    
Traders        
Recipes            
Latest Articles
Mortice joints.
Page 1, 2, 3, 4, 5  Next
 
Post new topic   Reply to topic    Downsizer Forum Index -> Make Your Own/DIY
Author 
 Message
Nick



Joined: 02 Nov 2004
Posts: 34535
Location: Hereford
PostPosted: Sat Mar 06, 21 9:05 pm    Post subject: Mortice joints. Reply with quote
    

Anyone used a mortiser? Any top tips? Just like a drill press, right, that makes square holes? Or am I missing something?

 
tahir



Joined: 28 Oct 2004
Posts: 45674
Location: Essex
PostPosted: Sun Mar 07, 21 6:52 am    Post subject: Reply with quote
    

Wot? Going into furniture now?

Never used one

 
dpack



Joined: 02 Jul 2005
Posts: 46244
Location: yes
PostPosted: Sun Mar 07, 21 8:55 am    Post subject: Reply with quote
    

i am an old style drill and chisel chap, workshop joiners seem to like them for speed and accuracy

never used one so cannot help with tips beyond read the instructions, watch some youtube vids and make the machine cut at the right speed, pressure and rate for the material and size/type of cutting tool

practice on scrap until you have an idea of the feel of the thing or you are sitting in A and E having not read the instructions
wood working machines are dangeroos

iiuc they are a combo of drill press and milling vice for a slot rather than a square hole so they are quite big and you need to take the work to it rather than it to the work

my mortise cutting is usually only for locks in doors on site, so i have not needed one, the joiners i used to use both had old industrial ones which got lots of workshop use

 
dpack



Joined: 02 Jul 2005
Posts: 46244
Location: yes
PostPosted: Sun Mar 07, 21 9:16 am    Post subject: Reply with quote
    

ps i am quite comfortable with many dangeroos things and ultra careful with wood working machines

for example when i see somebody on the telly cutting a half inch plank using a foot of open throat on a bandsaw i usually hope for the statistically inevitable to happen on camera as an example for those watching

if you can justify the cost as to vs take the bits to a bench joiner and get them to cut em and you have space for it seems a useful bit of woodwork kit

 
Nick



Joined: 02 Nov 2004
Posts: 34535
Location: Hereford
PostPosted: Sun Mar 07, 21 10:02 am    Post subject: Reply with quote
    

Yeah. Had a play yesterday with a drill and chisel/mallet combo. But I think I need to use a pillar drill for it to work well. And if I’m going to get one of those, I may as well get the right tool. If it’s not totally embarrassing, I may share

 
Treacodactyl
Downsizer Moderator


Joined: 28 Oct 2004
Posts: 25795
Location: Jumping on the bandwagon of opportunism
PostPosted: Sun Mar 07, 21 6:24 pm    Post subject: Reply with quote
    

I've got a mortice attachment for my drill press. Works ok but a bit fiddly and the clamping isn't great.

Basically it's a drill than runs inside a hollow square chisel. Mine works fine in softwood but I'd guess large mortices in hardwood would be more tricky.

I'd ensure any machine clamps your workpiece well, not just for drilling but pulling the chisel out of the mortice without lifting the wood.

I would think a mortice machine would be much safer than a mallet and chisel. You can get chain morticers if you fancy something a bit more meaty, and expensive.

 
Nick



Joined: 02 Nov 2004
Posts: 34535
Location: Hereford
PostPosted: Sun Mar 07, 21 10:06 pm    Post subject: Reply with quote
    

Yeah. I’ve seen chain mortisers. They can be hired. But they look terrifying.

Appreciate the general reassurance and tips tho.

 
Shan



Joined: 13 Jan 2009
Posts: 9075
Location: South Wales
PostPosted: Tue Mar 23, 21 2:02 pm    Post subject: Reply with quote
    

Couldn't you use a router instead? It would be a bit more fiddly but should do it.

 
Nick



Joined: 02 Nov 2004
Posts: 34535
Location: Hereford
PostPosted: Tue Mar 23, 21 2:14 pm    Post subject: Reply with quote
    

I bought a mortiser. Not a mad chain one. More of a drill press style one. Works really well.

My router doesn't have the depth. I need to go in upto 100mm.

 
Shan



Joined: 13 Jan 2009
Posts: 9075
Location: South Wales
PostPosted: Tue Mar 23, 21 2:15 pm    Post subject: Reply with quote
    

What are you making?

 
Nick



Joined: 02 Nov 2004
Posts: 34535
Location: Hereford
PostPosted: Tue Mar 23, 21 2:17 pm    Post subject: Reply with quote
    

A porch.

 
Shan



Joined: 13 Jan 2009
Posts: 9075
Location: South Wales
PostPosted: Tue Mar 23, 21 2:17 pm    Post subject: Reply with quote
    

Nice!

 
Slim



Joined: 05 Mar 2006
Posts: 6612
Location: New England (In the US of A)
PostPosted: Tue Mar 23, 21 4:42 pm    Post subject: Reply with quote
    

If you want a nerdy woodworking and miscellany youtube rabbithole, check out Matthias Wandel and his pantorouter.
My phone won't let me touch the ole at the end of this sentence, quite an odd error. ole

 
Nick



Joined: 02 Nov 2004
Posts: 34535
Location: Hereford
PostPosted: Fri May 07, 21 7:42 pm    Post subject: Reply with quote
    

Shan wrote:
Couldn't you use a router instead? It would be a bit more fiddly but should do it.


The router works well to cut the tenons but the mortiser cuts the mortises. And it’s a beast. Working with oak is a joy. I went for 3 year dried, so not green, not kiln dried. It’s like steel to cut and to carry.

But it’s a joy to work. Joints, measured careful and cut slowly are sliding together. I’m about 2/3 done, and am simply pegging them together; no glue. I’ll silicon seal where panels join, the glazing and where it sits on the brick work, but otherwise nothing holding it together. I ache, I’ve got blood blisters and my bogies are made of saw dust, but I’m loving the project.

 
Slim



Joined: 05 Mar 2006
Posts: 6612
Location: New England (In the US of A)
PostPosted: Sat May 08, 21 2:09 am    Post subject: Reply with quote
    

Might want to consider a dusk mask..... I think sawdust can be a bit rough on the lungs long term

 
Post new topic   Reply to topic    Downsizer Forum Index -> Make Your Own/DIY All times are GMT
Page 1, 2, 3, 4, 5  Next
Page 1 of 5
View Latest Posts View Latest Posts

 

Archive
Powered by php-BB © 2001, 2005 php-BB Group
Style by marsjupiter.com, released under GNU (GNU/GPL) license.
Copyright � 2004 marsjupiter.com