Home Page
   Articles
       links
About Us    
Traders        
Recipes            
Latest Articles
Twin wheel wheelbarrows
Page 1, 2  Next
 
Post new topic   Reply to topic    Downsizer Forum Index -> Make Your Own/DIY
Author 
 Message
Treacodactyl
Downsizer Moderator


Joined: 28 Oct 2004
Posts: 25795
Location: Jumping on the bandwagon of opportunism
PostPosted: Tue Feb 09, 16 6:05 pm    Post subject: Twin wheel wheelbarrows Reply with quote
    

I'm considering a twin wheel wheelbarrow as I have a large amount of soil to move from the front to the back of a house. Thankfully it's down a slope but I still don't wish to put my back out!

I know some think they can be unstable and it seems a bit strange most seem to have the axle under the barrow rather than towards the front but that would mean less of the weight needs to be lifted?

I'm currently looking at this one: https://www.haemmerlin.co.uk/products/pro-select/twin-original/wheelbarrow-twin-original-galvanised-90l-twin-pneumatic

It's a well known make, not too big, and the wheels look a good size. Any comments? It would be good if it lasted many years but, realistically, one or two would be fine as it'll do a lot of work.

Nick



Joined: 02 Nov 2004
Posts: 34535
Location: Hereford
PostPosted: Tue Feb 09, 16 6:11 pm    Post subject: Reply with quote
    

Every wheelbarrow I've ever had has suffered punctures. All I can add is that B&Q sell puncture proof wheels, and when a blackthorn ruins your day, they are the thing to invest in.

Treacodactyl
Downsizer Moderator


Joined: 28 Oct 2004
Posts: 25795
Location: Jumping on the bandwagon of opportunism
PostPosted: Tue Feb 09, 16 6:18 pm    Post subject: Reply with quote
    

I do have blackthorn and a normal barrow with said puncture proof tyre. Ideally I'd get the same wheels but I don't think that's possible so I'll have to ensure the path is clear or replace them.

dpack



Joined: 02 Jul 2005
Posts: 46249
Location: yes
PostPosted: Tue Feb 09, 16 6:39 pm    Post subject: Reply with quote
    

i have probably done thousands of miles and shifted thousands of tons behind a wheel barrow

single wheel is ideal:

in confined spaces,
up or down a plank,
on a rough surface,over curbs etc ,

so long as the wheel has a fat tyre (not the narrow hard sort) pumped to the right hardness it will work over everything from deepish soft mud to demolition rubble

the flat tyre thing is easily sorted with "slime" sold for bicycle tyres as a preventative or in an emergency the foamy stuff in a can for getting a car to a tyreshop.

i can see no advantages to a two wheeler and plenty of disadvantages on anything but a smooth ,wide, flat job .

my most recent one came from travis perkins (builders barrow) and has so far done two houses worth of skip filling, fetching bulk sand etc and after a few years stood outside is like new apart from a few dents and scratches .

avoid diy shops etc as builders merchant barrows are usually far stronger,better proportioned and much better coated for rust resistance and they are usually cheaper.

ps a well filled barrow is quite easy to lift off the legs and most energy goes into moving the thing rather than lifting the load.

a one wheel also allows the option of taking a slope at an angle as the load remains level above the wheel whereas a two wheel can only go strait up or down without tipping over as the load stays at the angle the wheels make with the floor.

hope this helps

Ty Gwyn



Joined: 22 Sep 2010
Posts: 4613
Location: Lampeter
PostPosted: Tue Feb 09, 16 9:56 pm    Post subject: Reply with quote
    

Not used a twin wheel barrow myself,seen them used around stables and piggeries on flat concrete surfaces,
My though was ,how the hell do you push that through muck or over rough ground,
My latest barrow is an all galv Scandinavian job,good solid ,balanced barrow �70.

yummersetter



Joined: 26 Jan 2008
Posts: 3241
Location: Somerset
PostPosted: Tue Feb 09, 16 10:01 pm    Post subject: Reply with quote
    

One of our four barrows is a two-wheeler, probably the same one you've linked. Its our least favourite (for garden and orchard purposes); cumbersome as it only travels in straight lines, tends to be loaded more so it heavier and it's a nuisance to tip as it has to be lifted a long way. Going rusty, too.
I'd sooner do two trips in a nippier barrow to one with this, my first choice is quite small and narrow but manoeuvres well up overgrown paths and between bulging trees and bushes.

Treacodactyl
Downsizer Moderator


Joined: 28 Oct 2004
Posts: 25795
Location: Jumping on the bandwagon of opportunism
PostPosted: Wed Feb 10, 16 7:59 am    Post subject: Reply with quote
    

I've deliberately avoided going for a bigger barrow to prevent the temptation of overloading. With the same load as a single wheeled barrow the wheels will dig in less as they will have less weight on them and I will also need to lift less.

I also currently have problems with the singled wheeled barrow tipping over when loading if it's parked sideways on a slope, even with just loading grass cuttings. A twin will be more stable.

The maneuverability is a concern, I'd like to try one before buying but nowhere local seems to stock them. Most of the planned work will not require weaving in and out of places though.

Nick



Joined: 02 Nov 2004
Posts: 34535
Location: Hereford
PostPosted: Wed Feb 10, 16 8:12 am    Post subject: Reply with quote
    

Surely, with the same load you'll have to lift the same, regardless of the number of wheels.

Treacodactyl
Downsizer Moderator


Joined: 28 Oct 2004
Posts: 25795
Location: Jumping on the bandwagon of opportunism
PostPosted: Wed Feb 10, 16 8:14 am    Post subject: Reply with quote
    

Depends on the axle. Single wheeled barrows have it at the front, so 2/3 of the load goes down the front and 1/3 on your arms. The twin I linked to has the axle under the load so I would expect less weight on your arms.

chez



Joined: 13 Aug 2006
Posts: 35935
Location: The Hive of the Uberbee, Quantock Hills, Somerset
PostPosted: Wed Feb 10, 16 9:46 am    Post subject: Reply with quote
    

My Pa invested in one as he got more unsteady on his feet (in to his eighties when his knees went). It's good on even ground in straightish lines, not so nippy, as other people have said. I like it, but I think it entirely depends on the user and the job.

wellington womble



Joined: 08 Nov 2004
Posts: 15051
Location: East Midlands
PostPosted: Wed Feb 10, 16 4:47 pm    Post subject: Reply with quote
    

And easier to heft, I expect.

I am pondering the practicality of wheelbarrows at all (not necessarily for any one else, but I'm not finding them great). I'm thinking of a four wheeler pull/push truck. I find all the lifting up and down a bit tedious, and they run away with me and then give me a jolt where they get stuck in uneven ground. Worst of all, you can only manoeuvre the thing from behind it. So having driven up to, say, shed door with a bale of straw, I have to squeeze past the thing and can't pull it in tight after me very easily. Then it is almost impossible to push the thing out of the doorway from the the front, so I'm stuck in the shed. I find this happens between my veg beds as well.

I can see the advantages of a barrow where you need to tip, but I mostly don't. I also suspect they are more manoeuvrable around tight corners, but for 95 percent of what I do the advantages of being able to shove it from both directions, and not having to support any weight on my arms in transit would massively outweigh being able to tip and corner on one wheel. Everything has be shovelled in either way and my beds are all raised and my compost is in bins, so I can't tip out anyway.

Sorry, TD, I'm not suggesting they are remotely suitable for your job!

sean
Downsizer Moderator


Joined: 28 Oct 2004
Posts: 42219
Location: North Devon
PostPosted: Wed Feb 10, 16 5:23 pm    Post subject: Reply with quote
    

I'm thinking a sack barrow with a smallish bin and some bungy cords. Multiple bins would enable a three person fill/transport/empty relay too.

dpack



Joined: 02 Jul 2005
Posts: 46249
Location: yes
PostPosted: Wed Feb 10, 16 6:18 pm    Post subject: Reply with quote
    

a good sack barrow with pneumatic tyres is useful on flat things .ideal for lifts ,pavements etc.

rubbish at lumpy or soft stuff as they have little ground clearance and they are too wide for a scaff plank

the triple wheels each side are good for curbs and steps

one can overload them and bend the axle which makes them very wonky (oops three times)

re too much to lift in a standard barrow if you dont fill fully at the rear of the barrow (or add extra at the front) they are almost balanced on the axle ,in mixed loads put the heavy stuff at the front , with long stuff let it poke out at the front .

properly filled a good barrow should have only a few kilos of lift on the handles and the wheel takes nearly all the load.a badly filled one feels heavy or falls over sideways

NorthernMonkeyGirl



Joined: 10 Apr 2011
Posts: 4630
Location: Peeping over your shoulder
PostPosted: Wed Feb 10, 16 8:00 pm    Post subject: Reply with quote
    

I've seen a barrow for sale that has twin wheels in the normal place (at the front) - worth a consideration?

Mistress Rose



Joined: 21 Jul 2011
Posts: 15998

PostPosted: Thu Feb 11, 16 8:04 am    Post subject: Reply with quote
    

WW, I sometimes pull a builders wheelbarrow when I am shifting logs around the yard and it is muddy. Find it much easier.

Post new topic   Reply to topic    Downsizer Forum Index -> Make Your Own/DIY All times are GMT
Page 1, 2  Next
Page 1 of 2
View Latest Posts View Latest Posts

 

Archive
Powered by php-BB © 2001, 2005 php-BB Group
Style by marsjupiter.com, released under GNU (GNU/GPL) license.
Copyright � 2004 marsjupiter.com