Stihl FS 95 C-E brushcutter

Latest Articles

Stihl FS 95 C-E brushcutter
Page Previous 1, 2, 3

Downsizer Forum Index -> Land Management

Author

Message

onemanband

Joined: 26 Dec 2010
Posts: 1473
Location: NCA90

Posted: Sun Nov 09, 14 5:20 pm Post subject:

mousjoos wrote:

Not a clue...man in shop was adamant (at least according to his make-up...) that this should be done once machine was going to be stored for any length of time...I'm not enough of a mechanic to question his wisdom on this

Well I can say much the same - apart from my man in shop isn't a dandy highwayman.

mousjoos

Joined: 05 Jun 2006
Posts: 1986
Location: VERY Sunny SW France

Posted: Mon Nov 10, 14 5:26 am Post subject:

onemanband wrote:

mousjoos wrote:

Well I can say much the same - apart from my man in shop isn't a dandy highwayman.

this is why it's so specialised

Mutton

Joined: 09 May 2009
Posts: 1508

Posted: Mon Nov 24, 14 12:54 pm Post subject:

We have a Stihl brushcutter, have had for a few years - might be that model. Its been very reliable but it has its limits.

For having a go at brambles, youngish gorse, smaller branches on gorse it is great. For bracken and especially reeds less so - gets tangled very fast. You also have to wear all the clobber. We now use scythes as much as we can - with a shorter, thicker brushcutting blade. They are better on bracken and reeds than the brushcutter, also no protecting gear or whitefinger off the vibrations.

wellington womble

Joined: 08 Nov 2004
Posts: 15051
Location: East Midlands

Posted: Mon Nov 24, 14 4:40 pm Post subject:
Don't need to worry about reeds! It arrived on Friday, but I haven't had a chance to play with it yet. It didn't come with any fuel, anyway. The handover consisted of 'there you go, luv'.

wellington womble

Joined: 08 Nov 2004
Posts: 15051
Location: East Midlands

Posted: Thu Apr 16, 15 9:33 pm Post subject:
Works great, was to start and isn't too heavy. However, it requires Stihl (tm) Motomix to run on (according to the manual, anyway). What's that when it's at home, and what's it's generic name? I though it ran on petrol, that you bought from a garage. This appears to have been naive!

sean
Downsizer Moderator

Joined: 28 Oct 2004
Posts: 42219
Location: North Devon

Posted: Thu Apr 16, 15 9:36 pm Post subject:
It'll be premixed two stroke fuel.

wellington womble

Joined: 08 Nov 2004
Posts: 15051
Location: East Midlands

Posted: Thu Apr 16, 15 9:45 pm Post subject:
Doesn't come out of a petrol pump, then? Bother. Why are things always more complicated than you thought?!

sean
Downsizer Moderator

Joined: 28 Oct 2004
Posts: 42219
Location: North Devon

Posted: Thu Apr 16, 15 9:56 pm Post subject:
You can use petrol from a pump and mix it with the oil yourself. But if you're not going through gallons of it and want the convenience then the premixed stuff may make life simpler.

Falstaff

Joined: 27 May 2009
Posts: 1014

Posted: Thu Apr 16, 15 10:36 pm Post subject:
oh Cum on ! It's 2 stroke you say ? What mix are you wanting ? (Find that in the manual) - IF the manual is "use stihl stuff" - FIND it on a forum ! If you're stuffed use a 30 - 1 mix with 10-40 oil - But I'd really want to use the forums resources first !

wellington womble

Joined: 08 Nov 2004
Posts: 15051
Location: East Midlands

Posted: Fri Apr 17, 15 7:03 am Post subject:
I did. It does. I am. If you can't be more polite, please refrain from commenting on my thread.

Treacodactyl
Downsizer Moderator

Joined: 28 Oct 2004
Posts: 25795
Location: Jumping on the bandwagon of opportunism

Posted: Fri Apr 17, 15 7:19 am Post subject:

As has been said, it'll be a pre-mixed fuel. It'll be more expensive but it'll have a longer shelf life and should not contain some of the more harmful elements of pump fuel that can harm the seals of 2-stroke tools.

It should be available anywhere that sells Stihl tools, such as country stores or large garden centres.

I'd run it on the motomix at least a few times, probably until it's out of guarantee.

wellington womble

Joined: 08 Nov 2004
Posts: 15051
Location: East Midlands

Posted: Fri Apr 17, 15 8:25 am Post subject:
Thank you. I shall look less of an eejit in Higgots, now. I didn't know whether it was really necessary or not. Of course the manual says you need the branded stuff!

dpack

Joined: 02 Jul 2005
Posts: 46238
Location: yes

Posted: Fri Apr 17, 15 10:57 am Post subject:

branded fuels and lubricants are a bit more expensive,depending on how near your supplier is can be less convenient but have been tested for that machine.as mentioned perhaps a good idea during the gnt period or if you only use it a bit.

however both stihl and husky engines will run on a variety of moody fuels it might reduce the time between services and perhaps the life of the engine/tool head etc but if you consider a bloke wearing nowt but a pair of shorts in the middle of a jungle with a vintage saw he probably isnt using premixed "manufacturer"fuel but he will work all day every day and relies on his saw to do that .

it is important to get the 2 stroke mix right for that engine(see manual or online info) and to lubricate/clean various bits with the correct type of oil/methods.

ps be careful and use the ppe every time,even though brush cutters are fairly safe they can chuck rocks and the spray from some plants (see hogweed etc)can be quite nasty .if the thing tangles with brambles etc a few mins sharpening might help a lot.

that said they are very quick at( edit for missing)clearing weeds

Last edited by dpack on Fri Apr 17, 15 11:36 am; edited 1 time in total

alison
Downsizer Moderator

Joined: 29 Oct 2004
Posts: 12918
Location: North Devon

Posted: Fri Apr 17, 15 11:31 am Post subject:
On one of our stihl things (not sure which one) we have a mixer bottle for the fuel. you put in unleaded and squirt in the correct measure of oil.

onemanband

Joined: 26 Dec 2010
Posts: 1473
Location: NCA90

Posted: Tue Jun 09, 15 5:36 pm Post subject:

My FS55 died last week, so I bought an FS94 today, used it for 2 hours and the verdict is a big thumbs up.
I had no complaints about the '55, but the '94 is better......
quieter, lighter, better balanced, easier starting, wider handlebars with better off-set, feels easier and more precise to use.
The variable throttle dial seems a bit unnecessary - I'll probably tape it up on max setting so it doesn't inadvertently get moved. Or I might read the instructions and see what it's for

Re 2-stroke. I use the Stihl 'shots'. Yes, cost per litre they are expensive, but a �1 'shot' does a gallon of fuel - no thinking, no mess, no mistakes.

How you getting on with yours WW ?

	Downsizer Forum Index -> Land Management	All times are GMT Page Previous 1, 2, 3
Page 3 of 3

View Latest Posts