Hand planer or bench planer thicknesser

Latest Articles

Hand planer or bench planer thicknesser
Page 1, 2 Next

Downsizer Forum Index -> Make Your Own/DIY

Author

Message

Jb

Joined: 08 Jun 2005
Posts: 7761
Location: 91� N

Posted: Fri Nov 30, 12 11:46 am Post subject: Hand planer or bench planer thicknesser
Having burnt out my axminster cheapie planer I'm looking for a replacement. Most of what I use if for was for rough thicknessing so I was thinking about getting a planer / thicknesser instead. The question is, are they worth it or is just another bit of kit to stub toes on in the workshop?

RichardW

Joined: 24 Aug 2006
Posts: 8443
Location: Llyn Peninsular North Wales

Posted: Fri Nov 30, 12 5:17 pm Post subject:
I use mine lots but still use a hand held one as well.

mousjoos

Joined: 05 Jun 2006
Posts: 1986
Location: VERY Sunny SW France

Posted: Sat Dec 01, 12 8:50 am Post subject:

I bought a 10 x 6 Elektra Beckum from Axminster about 12 years ago;it was just before the model was superceded (sp) by another, & thus was reduced in price. I bought it for the business I had at the time; used it every day, more or less, & have only replaced the knives & the pulley.......to me at least that seems like excellent value for money.
EB are now something more obscure like a part of Ryobi, & recently when trying to order parts here (arse-end of SW France), it was quicker to ask Axminster to send them (& cheaper) than local suppliers.
I still have the machine, & for a machine this size, it's very robust & has earned me (or allowed me to earn) a lot of money.....

I hope this helps

reebok

Joined: 06 Mar 2011
Posts: 17

Posted: Mon Dec 03, 12 8:31 pm Post subject:
If you are serious about quality woodworking, a good planer/thicknesser will take you to a new, higher level and make you very happy.

Jb

Joined: 08 Jun 2005
Posts: 7761
Location: 91� N

Posted: Wed Jan 02, 13 5:01 pm Post subject:

OK, I need to get one of these now (need to make some window frames and it will make the job a lot easier) but don't know what to get, so based on the choice of my local DIY shed or axminster should I go for Einhell, Ryobi, Black and Decket or Makita?

For the job in hand a planer rather than a planer thicknesser is called for so at least it should be a bi cheaper but I'm still willing to spend enough to get something that won't burn out again.

Hairyloon

Joined: 20 Nov 2008
Posts: 15425
Location: Today I are mostly being in Yorkshire.

Posted: Wed Jan 02, 13 6:51 pm Post subject:
I've never heard of Einhell, B&D used to be good about 30 years ago. Ryobi seem good, but in my experience, their customer services are full of manure. So, all else being equal, I'd probably try Matika.

perlogalism

Joined: 27 Nov 2009
Posts: 440
Location: Near Welshpool

Posted: Thu Jan 03, 13 9:22 am Post subject:

Hairyloon wrote:

I've never heard of Einhell, B&D used to be good about 30 years ago.
Ryobi seem good, but in my experience, their customer services are full of manure.

So, all else being equal, I'd probably try Matika.

Ditto. Don't buy Ryobi whatever you do: IF you do manage to source any spares, they cost a fortune. As an example, the primer bulb on my ryobi brushcutter perished. You can't buy the bulb, only the whole assembly including the carburettor! �65 as opposed to �3.50 for the Stihl equivalent

See if AEG do a planer: I'm getting to be a big fan of their tools. Well designed, long lasting and sensible money.

Jb

Joined: 08 Jun 2005
Posts: 7761
Location: 91� N

Posted: Thu Jan 03, 13 10:03 am Post subject:

Well I've just ordered a Makita planer, I had a quick look for AEG but they either seemed very expensive or out of stock, whereas Makita was very expensive on their list prices but a bit of shopping around finds some much more sensible prices. Of course reading some reviews people start saying how much better the next model up is but at that point I'd be spending �200 on a planer which is the entry point for some planer thickenessers so going to that level seemed silly.

perlogalism

Joined: 27 Nov 2009
Posts: 440
Location: Near Welshpool

Posted: Thu Jan 03, 13 2:31 pm Post subject:
Can't go far wrong with that. Let us know what you think once you've had a chance to play with it

Gervase

Joined: 17 Nov 2004
Posts: 8655

Posted: Thu Jan 03, 13 3:53 pm Post subject:
I've got a Makita thicknesser and it's damned good - really robust, easily adjusted and consistent in operation. It's one of those bits of kit that becomes indispensable.

tahir

Joined: 28 Oct 2004
Posts: 45674
Location: Essex

Posted: Wed Jun 01, 16 1:02 pm Post subject:

I think I may be in the market for a planer/thicknesser

First job would be to square off the (pre-treatment) offcuts from the recently woodworm treated dining table cherry. We've ended up with loads of stuff that I've cut down to around 410mm long which we'll be turning into 10 chopping boards (1 for each of our brothers and sisters).

Next job will be the timber for the table, currently boards are 100-300mm wide, 28mm thick and about 1.7mtrs long.

Space isn't an issue, so am I better with a lumpy (single phase) secondhand or something cheap and new?

e.g.
Used:
Elektra Beckum

Samco

AEG

New:
Record

Fox

mousjoos

Joined: 05 Jun 2006
Posts: 1986
Location: VERY Sunny SW France

Posted: Wed Jun 01, 16 3:14 pm Post subject:

Go for the Elektra Beckum

Spares are still available, although rumour has it EB became Ryobi, & then disappeared...same story with Elu, involving Dewalt &/or B&D

I have had this very same machine for 16 or so years now

Only thing I don't like is the infeed table micro adjust ie little grub screws...fiddly & not very accurate

Common fault is the pulley wheel wears & the belt slips off...very annoying...spares from Axminster, not too pricey

Depending on condition 350 on ebay (your link) is an okay price....maybe 450 - 475 tops

Always check when buying this type of machine secondhand, how flat & straight the tables are...ie if going to collect take a straight edge & lay it along the length of the machine, having first adjusted the tables to the same height...that is to say 0 millimetres
Look at the general wear & tear...if it looks like it's been used as a workbench then think twice

Hope this helps

tahir

Joined: 28 Oct 2004
Posts: 45674
Location: Essex

Posted: Wed Jun 01, 16 4:55 pm Post subject:
Thanks as always mj

dpack

Joined: 02 Jul 2005
Posts: 46233
Location: yes

Posted: Wed Jun 01, 16 5:23 pm Post subject:

e b make/made very good kit,as mousjoos recons spares are available it should last for ages

the light duty ones are often a bit wobbly and often far noisier than pro ones.

moving the thing will be a bit of a task and probably best with it strapped into a van rather than in a car boot

if i was wanting a cheap but effective smallish one with a 2 yr gnt i might have a go with erbauer .

i have several of their machines which seem to do very well for the price however the eb one can cut a wider plank and if in good nick is a far better machine and even with transport time/money on top of the 350 is probably better value if you plan for long term use.

Nick

Joined: 02 Nov 2004
Posts: 34535
Location: Hereford

Posted: Wed Jun 01, 16 7:41 pm Post subject:
Is hiring not a sensible option? Will you use it again after the table?

	Downsizer Forum Index -> Make Your Own/DIY	All times are GMT Page 1, 2 Next
Page 1 of 2

View Latest Posts