off grid power, modern times, for LLP

Latest Articles

off grid power, modern times, for LLP
Page Previous 1, 2, 3, 4

Downsizer Forum Index -> Energy Efficiency and Construction/Major Projects

Author

Message

Mistress Rose

Joined: 21 Jul 2011
Posts: 15966

Posted: Thu Jul 27, 17 5:22 am Post subject:

Getting an article or book to the required number of words is difficult isn't it. I have a couple of potential books on the go, and neither is going anywhere near the right number of words. On the other hand, trying to fit a series of articles into a 6 page newsletter for our coppice group is sometimes tricky to fit it all in to look sensible if one article just overflows onto another page.

Your book sounds interesting Lorraine. Will be interested to know when it is published.

Lorrainelovesplants

Joined: 13 Oct 2006
Posts: 6521
Location: Dordogne

Posted: Mon Jul 31, 17 10:17 am Post subject:
Im actually finding the writing an excellent thing! Ive done stuff before for my thesis and for articles and reports, but the size is massive. Im shitting myself in case the computer crashes (a regular occurrence in our house), but am saving the book on two different mediums. Im at 50,000 words now with 11 days to go till I pack the computer away.

Mistress Rose

Joined: 21 Jul 2011
Posts: 15966

Posted: Tue Aug 01, 17 6:45 am Post subject:
Always best to save to at least one other place. We have a server in our house, so even the 'private' stuff I have, like partly written books gets saved there too. Otherwise, as you are doing, saving to 2 other mediums means you will only lose a small part if anything goes wrong.

Lorrainelovesplants

Joined: 13 Oct 2006
Posts: 6521
Location: Dordogne

Posted: Tue Aug 01, 17 12:13 pm Post subject:
so BG has decided to bump leccy prices up by 12.5%. Thats gonna make people start thinking about renewables surely?

Slim

Joined: 05 Mar 2006
Posts: 6612
Location: New England (In the US of A)

Posted: Tue Aug 01, 17 12:24 pm Post subject:
That's quite an increase. Definitely making the ROI on solar, etc. more favorable!

dpack

Joined: 02 Jul 2005
Posts: 46209
Location: yes

Posted: Tue Aug 01, 17 1:32 pm Post subject:

it does swing things a bit.

the improvements in cost to output and especially in cost of storage combined with a high grid price reducing the time scale of ROI should make micro pv etc more attractive to more people

in global terms much like "wireless" phone and internet has bypassed a landline system for comms. in many places a "gridless" system for leccy might well do the same once the initial costs are affordable to local or global investors or better still to the folk who need leccy.

Mistress Rose

Joined: 21 Jul 2011
Posts: 15966

Posted: Wed Aug 02, 17 6:42 am Post subject:
I think a grid system that small producers can put into is a better bet. My father remembered the days before the National Grid, and he said it was a really good thing. Remember before that, each town had its own power station, and those in the countryside often had nothing.

dpack

Joined: 02 Jul 2005
Posts: 46209
Location: yes

Posted: Wed Aug 02, 17 12:04 pm Post subject:

not only did each town /city area have it's own supply there were many variations in voltage and Hz which meant that if you moved from say leeds to wigan you would probably need a new toaster and radio etc etc and even if ac/dc, V and Hz were the same in two places the plugs would be a different shape.

national grid = standardised equipment and with the EU wide standards the area and number of folk who all need the same equipment specifications gives considerable economy of scale

even using micro grid systems a standard for ac or dc, V , phase choice and Hz makes sense to avoid the need for both small and big(on the micro scale) transformers and inverters to standardise the outputs from rooftop PV, wind turbines up the hill, the high and low pressure water power units and the central base load/storage options to give a standardised point of use output .
unless every individual and/or community is to grow it's own tellies and lightbulbs to match their very rare type of leccy it is best they are using the same specs as all the other local grids

a variation on this theme is that different production methods work best when producing a certain type of leccy eg PV panels make lowish voltage DC and a turbine fed by a high dam might be most efficient making high voltage 3 phase AC. neither will make a telly etc etc work if you feed them in raw therefore it is important to plan for the losses of conversion .

a very rough guide to the ratio of supply (assorted specs) to load (universal spec note issues of 240v ac as a standard supply with transformers etc dedicated to specific electrical goods mentioned above) is that overall supply and storage/baseline/peak etc all need to be considerably greater than overall demand.
the details will depend on the kit and population density, distances, doing the all the maths in all the correct equations etc, etc .

one piece at a time and try to make it all work as a system is the road to madness for small community to city scale stuff ( tis pretty crazy for a stand alone system ) so "off the shelf" plug and play style packages such as those of buffet and musk that hit the market big and first are likely to become standard ( see windows/apple/pooter makers or the seven sisters/car makers etc etc ).

Mistress Rose

Joined: 21 Jul 2011
Posts: 15966

Posted: Thu Aug 03, 17 6:12 am Post subject:

That is mainly true Dpack, but sometimes the largest players will get their system in regardless. VHS versus Betamax springs to mind, although Betamax was better.

Remembering computers from about 1970, the first one I saw was a terminal which must have been in excess of 10' long by 4' square, tended by a lady in a white coat, which took punch cards. When the smaller ones started to come along, it was very difficult to find a printer and a computer that would talk to each other unless made by the same manufacturer. This is the sort of thing that needs to be avoided with small scale, and which hopefully we worked through in the first part of the 20th century.

As an aside, husband rewired a house a few years ago that still had the old DC wiring in it as the local power station started by providing DC to a small area. Next came the early AC wiring which was losing most of its rubber coating, and then some patches of modern wiring.

dpack

Joined: 02 Jul 2005
Posts: 46209
Location: yes

Posted: Thu Aug 03, 17 12:31 pm Post subject:

it is true that the "best" system is not always the system which performs best in the market and therefore becomes the standard system, however be it "best" or not a standard system is a primary requirement for things such as leccy, ( vehicle fuels, ammunition sizes etc etc give further and slightly different examples of the principle ).
this gives scope for assorted makers to develop their products to use the "standard" consumable.

in the reality of a leccy production/distribution service there is a compromise in that a "standard" needs only to be applied to a few aspects of the overall system.
eg 220/240V rms, single phase, AC at 50 Hz at the consumer's 3 pin europlug socket that then can be attached to a wide variety of equipment with a standard 3 pin plug.
the various equipment then either uses power at that spec or converts it with it's own power supply unit/s to a form suitable ac/dc/V/hz/P leccy to power each component group.

iirc folk such as musk and buffet have taken this into account and their systems have been designed to give a "standard" leccy at consumer level to allow for the consumer to power the range of equipment available locally, this avoids the need for a vhs vs betamax style trade war and persuading folk to replace all their kit for new that matches a new standard ( whatever the standard there would still be the issue of the different types of leccy for different units/components of units )

returning to my supply to load ratio conversion costs, distribution costs and further conversion costs energy and any planned power system needs to account for needing considerably more energy input than the expected output.
ie for every watt of power used it takes more watts of renewable energy available for "harvest" to provide it

W out = W in minus losses therefore both minimising losses and ensuring the initial energy harvest is sufficient is important for any practical system.
there is little point in trying to convince folk they have to choose between lights, washing machine and freezers etc and charging the car.

minimising losses is a one piece at a time process but ensuring that W in is big enough to cover losses before it gets to W out is fairly easy as one makes/gets a bigger "harvester".

in practical terms the combined/simplified equations and numbers are available so as one can, for instance, decide how many PV panels and what size of battery you need in your location, for say, a 5 person off grid leccy supply for domestic and small holding use and to power 2 cars (500 miles per week ) and 3 bikes (100 miles per week ) etc etc .
the input will need to be surprisingly greater than the nominal combined outputs of the end user kit.

Lorrainelovesplants

Joined: 13 Oct 2006
Posts: 6521
Location: Dordogne

Posted: Wed Dec 11, 19 12:43 pm Post subject:

Im reviving this post because like the real sustainable little old person I am I want to install solar here in France.

NOT as simple as it sounds.

Despite Macron stating that solar will be encouraged EDF has the monopoly and is charging a fortune and tying people into unrealistic contracts.
We have 2 adjoined buildings with a meter each. We would like to install a system on each roof (if we are allowed), or in the rear garden if roof is a no-no.
We DONT want to send power back to the grid. To complicated and beurocratic here.

So - a couple of panels linked to immersun or equivalent and then the supply.

IF we do it DIY and buy and import a kit it will be hugely cheaper. We have a great electrician and between him and John could do this in a few days at a reasonable expense.

I have to find out whether we need a CONSUEL inspection to confirm its safe, but apart from this and planning permission questions, I think we can do this.

Looking for any imput. I know your all mainly in the UK - but if you know anyone in France who has self installed a hybrid system please do flag for me.

Thanks all.

dpack

Joined: 02 Jul 2005
Posts: 46209
Location: yes

Posted: Wed Dec 11, 19 2:44 pm Post subject:

if you have your own gear and storage and the pv part is not connected to the grid or having to use their kit/services seems sensible

there will be leccy regs and best practice but your local spark should know those .
building regs/ permissions for fitting panels?there might be planning regs for the panels on a visible roof thing?

is solar pv the best energy return for the financial/regs/practicalities?

how much leccy from those roofs with what kit?

research your needs, kit and regs:wink:

Lorrainelovesplants

Joined: 13 Oct 2006
Posts: 6521
Location: Dordogne

Posted: Thu Dec 12, 19 2:52 pm Post subject:

Thanks.

So, we need to be connected to the electrical supply to the house in order to access electricity at times when we need more draw than we are producing. Ive been told that a registered electrician can connect and that it would be prudent (not essential) to have a CONSUEL inspection (official nod).
In the summer we could produce a LOT of electricity having sun from 4am till 9pm, of course the electricity we use in summer is mainly to heat HW for guests having showers - so a full tank daily (about 250litres) in one gite and half a tank daily in the other. We dont need under floor heating on except from Nov till April.
Therein is a problem.
If we produce too much electricity it has to go somewhere - heating HW and sending to heat the floor is fine in winter. In summer we use the pool pump (unheated pool) (750w), so if we have a 3kW production then we need to 'use' all this - so pool (750w), HW immerser and floor (I need to sit and work all these usages out),
we have a sophisticated control system for the heating. The floor is in zones and the controls also kick in wall mounted wall heaters upstairs.
But switching from one to another or sending electricity to heat HW is complex.
Im out of my depth.

If we have slightly less production for the background stuff (freezer, fridge, lights, TV, computer) how do I balance using the electric to utilise washine machine, kettle, oven to use up the excess apart from manually trying to turn these all on to use up leccy?

dpack

Joined: 02 Jul 2005
Posts: 46209
Location: yes

Posted: Thu Dec 12, 19 6:22 pm Post subject:
solar water heating seems as though it might fit in to your energy harvest

Lorrainelovesplants

Joined: 13 Oct 2006
Posts: 6521
Location: Dordogne

Posted: Thu Dec 12, 19 6:26 pm Post subject:
If we do solar hot water we will need to remove the two water tanks we already have. And reconfigure the electrics and piping. Electric seems to be the better solution, even if we have to just have a couple of panels just to heat the HW & divert to the floor.

	Downsizer Forum Index -> Energy Efficiency and Construction/Major Projects	All times are GMT Page Previous 1, 2, 3, 4
Page 4 of 4

View Latest Posts