Connect 65mm square gutter downpipe to water trough?

Latest Articles

Connect 65mm square gutter downpipe to water trough?

Downsizer Forum Index -> Make Your Own/DIY

Author

Message

NorthernMonkeyGirl

Joined: 10 Apr 2011
Posts: 4630
Location: Peeping over your shoulder

Posted: Sat Feb 04, 23 11:34 am Post subject: Connect 65mm square gutter downpipe to water trough?

I have an old water tank that I want to use to capture rainwater. The ball float mechanism will work to stop water flow when full, and divert the rainwater down an existing overflow. But, what can I use to connect the trough fittings (25mm MDPE) to the gutter diverter? https://www.screwfix.com/p/floplast-square-rainwater-diverter-black-65-68mm

I have to have an extra pipe because the point of attachment of the diverter is well above the level of the tank - normally it's about water levels.

NorthernMonkeyGirl

Joined: 10 Apr 2011
Posts: 4630
Location: Peeping over your shoulder

Posted: Sat Feb 04, 23 11:47 am Post subject:
Alternatively, I'm overthinking the whole thing and need a hosepipe and jubilee clips?

dpack

Joined: 02 Jul 2005
Posts: 46247
Location: yes

Posted: Sat Feb 04, 23 12:06 pm Post subject:
jubilee clips, hose, bits of pipe to grip onto, etc is often effective milliput and gaffer tape have their uses during scrapheap challenge is the ball valve needed? water in til full, water out of overflow when full? keeping the water in the right place should be simple

	Downsizer Forum Index -> Make Your Own/DIY	All times are GMT
Page 1 of 1

View Latest Posts