|
|
Author |
|
Message | |
|
genesis
Joined: 19 Oct 2010 Posts: 27 Location: Halfway up a hill near Machynlleth
|
|
|
|
|
Cathryn
Joined: 16 Jul 2005 Posts: 19856 Location: Ceredigion
|
|
|
|
|
sean Downsizer Moderator
Joined: 28 Oct 2004 Posts: 42219 Location: North Devon
|
|
|
|
|
earthyvirgo
Joined: 24 Aug 2007 Posts: 7972 Location: creating prints in the loft, Gerlan
|
|
|
|
|
pollyanna
Joined: 03 Nov 2012 Posts: 221
|
|
|
|
|
genesis
Joined: 19 Oct 2010 Posts: 27 Location: Halfway up a hill near Machynlleth
|
|
|
|
|
dpack
Joined: 02 Jul 2005 Posts: 46207 Location: yes
|
|
|
|
|
Cathryn
Joined: 16 Jul 2005 Posts: 19856 Location: Ceredigion
|
|
|
|
|
Gervase
Joined: 17 Nov 2004 Posts: 8655
|
Posted: Sun May 11, 14 6:48 pm Post subject: |
|
Limewash is traditional and breathable, but it needs to be reapplied at least once every three years, which is a pain if you need scaffolding. There are more modern breathable finishes, however. One of the best is Beekosil, a silica-based paint which bonds to the aggregate in the mortar and to stone and brick and which is breathable. It's not cheap, but will last for at least 10 years.
It needs to be used with a primer and the instructions have to be followed to the letter, but if you do that, it's damned good.
It's worth ringing Nigel Jervis at Ty Mawr - the link given by earthyvirgo above - and getting some advice from the horse's mouth. He supplies limewash, pigments, silica paints and anything else you might need for breathable and sustainable building, and is an all-round good egg. |
|
|
|
|
earthyvirgo
Joined: 24 Aug 2007 Posts: 7972 Location: creating prints in the loft, Gerlan
|
|
|
|
|
|